Features/how to
A list of features and how they work, how to use them
The K notch filter is used to help reduce unwanted false alerts from vehicles that have radar on board, such as Hondas. (which create false alerts in the 24...
Wed, 6 Aug, 2025 at 12:13 PM
The GPS feature is not used for navigation. GPS-enabled detectors allow you to Mark locations of interest, Block false radar and laser alerts, tracks vehicl...
Wed, 6 Aug, 2025 at 1:25 PM
Autolearn uses the GPS feature to identify sources of false radar and memorizes location and frequency of each radar signal. Our AutoLearn software then com...
Thu, 23 Sep, 2021 at 5:16 PM
Rarely. The sophisticated software will prevent automatically blocking out true police signals.
Wed, 6 Aug, 2025 at 1:26 PM
We recognize if you are driving at slower rates of speed that you do not need full sensitivity. The Max 360 is able to increase sensitivity as your travelin...
Wed, 6 Aug, 2025 at 1:31 PM
Expert Mode will show you up to 4 radar signals at the same time and will show relative signal strength and associated Band of each signal.
Wed, 6 Aug, 2025 at 1:38 PM
The X80 is web ready and the USB port can connect to a PC for software downloads.
Thu, 23 Sep, 2021 at 5:13 PM
Yes, older models require a mono earphone. Most current models have a stereo jack.
Wed, 6 Aug, 2025 at 1:41 PM
To mark a particular location, press the "MRK" button. The display will read: "Mark?" Press the "MRK" button again to assign...
Wed, 6 Aug, 2025 at 4:15 PM
To lockout a false alert, (X, K or Laser only) press the mute button three (3) times, (either on the detector or the SmartCord®) during the alert. Pressin...
Wed, 6 Aug, 2025 at 4:16 PM